Using The Headset - Sony Ericsson HBH-30 Handbuch

HBH30_EN.book Page 10 Wednesday, February 6, 2002 10:16 AM

Using the headset

Once you have paired the headset with your phone,
you can make and receive calls using the headset as
long as it is turned on and within range of the phone
–up to 10 m (30 ft) with no solid objects in between.
If your phone supports voice dialling and it is
activated, you can use this feature with the headset.
The following instructions cover the use of the
headset with a Sony Ericsson or Ericsson phone with
built-in Bluetooth capability, or a Bluetooth phone
adapter from Sony Ericsson and a Sony Ericsson or
Ericsson phone.
Note: Always make sure the Bluetooth Operation mode
in the phone is on when using a Bluetooth headset.
Making calls
Phone functionality is still available when the headset
is connected. You can make a call with the phone or
with the headset.
To make a call using voice dialling
1. Make sure the phone and the headset are on and within
range of each other. Press .
10 Using the headset
2. After the beep, voice dial as you normally would.
If using the Bluetooth phone adapter: Say the voice
command after the phone beep (not after the headset
beep). To know when the phone beeps in relation to
the headset beep, make a test call using voice dialling.
3. End the call by pressing
.
You can also make a call using the phone's keypad
or phone book (if, for example, your phone does not
support voice dialling).
Answering calls
To answer a call using
1. When the headset rings, press
.
Note: If the phone rings first, wait until the headset
rings, then press .
2. End the call by pressing
.
To answer a second call
• You have to use the phone keypad to answer and
handle a second call, but you can still use the headset
for talking and listening. You cannot use the headset
buttons during a second call. Refer to the phone's user
documentation on how to handle more than one call
simultaneously.