Package Contents - Axis 207 Montageanweisung

AXIS 207/207W Installation Guide
AXIS 207/207W Network Camera
Antenna
(AXIS 207W only)
Status
indicator
(outer ring)
Microphone
Follow these steps to install the AXIS 207/207W on your local network (LAN):
1. Connect the camera - see Cable Connections, on page 4.
2. Assign an IP address - see All installation methods, on page 6.
3. For the AXIS 207W only, configure the wireless connection. See page 11.
For more information, please see the User's Manual, which is available on the CD
included in this package. Updated versions can be obtained from www.axis.com

Package Contents

Item
Network Camera
Power adapter
Camera stand
Flexible clamp
Connector block
CD
Cable clip
Printed Materials
Installation Guide
Focus ring
Notes
AXIS 207/AXIS 207W.
PS-L (AXIS 207)
PS-H (AXIS 207W)
The adapter is country-specific.
Supplied with 3 mounting screws. The extension section is ready fitted.
For shelf mounting.
4-pin I/O terminal connector block.
Documentation and software.
Self-adhesive - fixes to back panel for holding power cable.
AXIS 207/207W Installation Guide, Axis Warranty Document.
Lock ring
Network
indicator
Control
button
Network
Power
connector
indicator
Page 3
I/O terminal
connector
Product ID &
serial number
(S/N) label
Wireless indicator
(AXIS 207W only)
Power
connector