Tips For Use - Celestron 93664 Bedienungsanleitung

p A t
olAr ligning
Use the latitude adjustment knob
to make final adjustments to your
polar alignment in altitude. Use
the azimuth adjustment knobs to
make adjustments to your polar
alignment in azimuth. In order to
move your telescope smoothly in
azimuth, slightly loosen the three
azimuth plate screws before using
the azimuth adjustment knobs
(see Figure 6). Do not loosen
the actual mounting screws that
attach the wedge to the tripod.
t F u
ips or se
• If the latitude adjustment
knob is difficult to turn, slightly
loosen the bolts holding the
orange latitude pivot bar.
See Figure 5. This will allow the
bar the rotate more easily as
the latitude angle changes.
• The wedge has two positions
to attach the latitude pivot bar.
The forward position can be
used to give more range
of motion when used at
lower latitudes.
s c
ee the elestron
Celestron, 2835 Columbia Street, Torrance, CA 90503 • Phone (310) 328-9560 • Fax (310) 212-5835
#93664-INST 09-10
W
he edge
Latitude Pivot
Bar Positions
W : o
ArrAntY
A c
ccessorY
c
or contAct elestron At WWW
F
igure
Azimuth Adjustment Knobs
F
igure
ne YeAr limited WArrAntY
(#93685)
AtAlog For complete WArrAntY detAils
.
celestron
4
6
Azimuth
Plate
Screws
7
.
.
com