Herunterladen
Teilen
Diese Seite drucken
  1. Anleitungen
  2. Marken
  3. LaTrax Anleitungen
  4. Drohnen, Quadrocopter & Multicopter
  5. Alias series
  6. Benutzerhandbuch

LaTrax Alias series Benutzerhandbuch

Vorschau ausblenden
1
2
3
4
Verfügbare Sprachen

Verfügbare Sprachen

Quicklinks

Diese Anleitung herunterladen
If the Alias transmitter settings have been adjusted incorrectly for optimal flight performance, the transmitter should be returned to the default settings.
To return the transmitter to the default settings:
1. Turn the transmitter off.
2. Press and hold both AUX buttons.
3. While holding both AUX buttons, turn the transmitter on.
4. Continue holding the AUX buttons for 3 seconds until the transmitter beeps.
5. The transmitter is now reset and is in binding mode.
6. Connect a charged battery to the helicopter.
7. Wait 10 seconds for the helicopter to enter Bind Mode.
8. When binding is complete, the LEDs on the helicopter and on the transmitter will turn solid, and
the LCD on the transmitter will display the Disarmed Flight Screen (A).
Returning the Transmitter
to Default Settings
6200 Traxxas Way, McKinney, Texas 75070, Phone: 972-265-8000, Fax: 972-265-8011, Email: support@LaTrax.com
LaTrax.com
AUX1 button
Transmitter
A
AUX2 button
Rev 131104
loading

Verwandte Anleitungen für LaTrax Alias series

Inhaltszusammenfassung für LaTrax Alias series

  • Seite 4 8. Wenn das Verbinden beendet ist, werden die LEDs an Helikopter und Sender konstant leuchten Sender und das LCD-Display am Sender wird den Bildschirm Deaktivierter Flug (A) anzeigen. LaTrax.com 6200 Traxxas Way, McKinney, Texas 75070, Telefon: +1 972-265-8000, Fax: +1 972-265-8011, E-Mail: support@LaTrax.com Rev 131104...