security screw (L) with a screwdriver.
- Check the correct rotation of the propeller.
Instructions for use
Before use:
- Remove the appliance's protective film.
- Make sure that all the product's packaging has been removed.
Use:
- Unroll the cable completely before plugging it in.
- Connect the appliance to the mains.
-Turn the appliance on, by using the speed selection buttons.
- Guide the diffuser of the appliance to direct the flow of air in the desired
direction.
- To avoid a fierce start up of the fan, it is advisable to start off from the lowest
speed position and, once the fan has been switched on, progressively increase
the speed to the desired position.
Timer function:
- The appliance's operating time can be controlled.
- To program the operating time simply select the functioning period from 0 to
60 min , turning the timer knob (H).
-Once the time period has elapsed, the fan will turn off automatically.
Oscillation function:
- The oscillation function makes it possible to direct the flow from the apparatus
so that it automatically alternates over a range of 75º
- To activate this function, press the oscillating knob (H).
- To deactivate this function, follow the procedure for switching it on in reverse.
Height adjustment
- The appliance height can be adjusted, it's just necessary to unlock the knob
(O) place the appliance at the desired height and lock again the knob (O).
Once you have finished using the appliance:
-Turn off the appliance by selecting 0 on the speed selector.
-Unplug the appliance to the mains
- Clean the appliance.
Carry handle:
-The device has an handle on the upper part so it can be transported easily
and comfortably (Fig.2)
Cleaning
- Disconnect the appliance from the mains and allow it to cool before underta-
king any cleaning task.
- Clean the equipment with a damp cloth with a few drops of washing-up liquid
and then dry.
- Do not use solvents, or products with an acid or base pH such as bleach, or
abrasive products, for cleaning the appliance.
- Do not let water or any other liquid get into the air vents to avoid damage to
the inner parts of the appliance.
- Never submerge the appliance in water or any other liquid or place it under
running water.
- If the appliance is not in good condition of cleanliness, its surface may
degrade and inexorably affect the duration of the appliance's useful life and
could become unsafe to use.
- Then dry all parts before its assembly and storage.
Anomalies and repair
- Take the appliance to an authorised technical support service if product is
damaged or other problems arise. Do not attempt to disassemble or repair the
appliance yourself as this may be dangerous.
For EU product versions and/or in case that it is requested in your country:
Ecology and recyclability of the product
- The materials of which the packaging of this appliance consists are included
in a collection, classification and recycling system. Should you wish to dispose
of them, use the appropriate public recycling bins for each type of material.
- The product does not contain concentrations of substances that could be
considered harmful to the environment.
- This symbol means that in case you wish to dispose of the
product once its working life has ended, take it to an authorised
waste agent for the selective collection of Waste from Electric and
Electronic Equipment (WEEE).
Manual Boreal 16C Alpatec.indb 9
- The following information details the features related to ecodesign
Maximum fan flow rate (F)
Fan power input(P)
Service value (SV) (according to IEC 60879)
Standby power consumption (PSB)
Fan sound power level (LWA)
Maximum air velocity( c )
This appliance complies with Directive 2006/95/EC on Low Voltage, Directive
2004/108/EC on Electromagnetic Compatibility, Directive 2011/65/EU on the
restrictions of the use of certain hazardous substances in electrical and electro-
nic equipment and Directive 2009/125/EC on the ecodesign requirements for
energy-related products.
1422
m ³ /min
45
W
36.5
(m ³ /min)/W
0
W
59
dB(A)
4.4
meters/sec
7/10/15 9:38