Akasa integral P2NSX Bedienungsanleitung Seite 6

4. Gently insert the tray back into housing until the back fits against the housing.
NOTE: Aligning the HDD tray with guide rails.
5. Secure the enclosure face plate to the enclosure using the screws provided.
6. You are now ready to connect your SATA 2.5" enclosure to the system.
Choose the connection you want to use (USB or eSATA) and move to the corresponding chapter of the
manual for further instructions.
NOTE:
Do not connect both (USB and eSATA) cables at the same time.
5
DC5V
ESATA
HDD Installatio