Settings - Oregon Scientific Weather@Home BAR218HGX Bedienungsanleitung

To reposition the sensors
on screen:
1. On STATION screen, tap
.
2. Press and hold at the
right side of a sensor. Drag
it to your desired position.
3. Tap to confirm.

SETTINGS

You can set your weather station through the
application, such as measurement units.
The settings are as follows:
• Temperature
• Barometric
• Rainfall (not available in BAR218HGX)
• Wind speed (not available in BAR218HGX)
• Altitude
• Show Unavailable Sensor
• Automatically Sync Time
• Show Sea Level Pressure
BAR218HGX-UM-EN-R14.indd 8
To select the measurement unit:
1. Tap to view the measurement unit options.
2. Tap on your desired unit.
3. Tap to go back to the previous screen.
To set altitude:
The altitude reflects the distance from sea level at
your position.
1. Fill in the altitude of your main unit in the blank.
2. Tap Done.
8
2019/2/14 下午12:19