Southwing SH505 Benutzerhandbuch Seite 72

COMMANDS SUMMARY TABLE
FUNCTION
Pairing Mode
Power On
Accept a call
Reject a call
Volume Up
Volume down
End call
Mute microphone
Unmute microphone
Transfer call to mobile During a call press Push4 Button 3 times
Transfer call back to
Headset
Power Off
Voice Dialling
Pre-configured favou-
rite number call
Last number Redial
Disconnect from
phone
Check battery level
72
ACTION
WHEN HEADSET IS OFF
Press and hold On/Off Button for 5 sec. and
see the pairing instructions of your phone
Press and hold On/Off Button for 2 sec. and
see the pairing instructions of your phone
DURING A CALL
During incoming call press Push4 Button once Headset answers call
During incoming call press Push4 Button
twice
During a call briefly touch Vol+ Button
During a call briefly touch Vol- Button
During a call press Push4 Button once
During a call press Push4 Button twice
During a call with muted microphone press
Push4 Button twice
During a call press Push4 Button once
WHEN HEADSET IS IN STANDBY
Press and hold On/Off Button for 2 sec.
Press Push4 Button once
Press and hold Push4 Button for 1 sec.
Press Push4 Button twice
Press Push4 Button 3 times
Press Push4 Button 4 times
HEADSET RESPONSE
Light flashes alternatively red and green
and a series of high tones can be heard
Headset turns on and light flashes green
Headset rejects call
Every touch, you hear a beep with higher
volume and higher tone
Every touch, you hear a beep with lower
volume and lower tone
Headset hangs up the current call
Microphone is muted and tones are heard
The microphone is unmuted
Call continues in mobile
Call continues in Headset
Headset turns off and light flashes red
Headset makes a series of 4 beeps while
mobile initiates the voice dialling command
Headset makes a call to the stored
Favourite number / Pre-configured number
Mobile redials
Headset disconnects from phone
A series of beeps indicates remaining talk
time in hours