Philips AZ 2755 Bedienungsanleitung Seite 8

CD PLAYER
PLAYING A CD
1. Press POWER to on position.
2. Press CD source button.
– The CD indicator lights up.
3. To open the CD door, press OPEN on the CD door.
4. Insert a CD with the printed side facing up and press the CD
door gently to close.
5. Press PLAY/PAUSE 2; on the set to start playback.
6. Adjust the sound using VOLUME 4 , 3 and DBB.
7. To interrupt playback press PLAY/PAUSE 2;. To resume,
press PLAY/PAUSE 2; again.
8. To stop CD play, press STOP 9.
9. Press POWER again to switch off the set.
– The CD indicator goes out.
Note: CD playback will also stop when:
– you press the CD door open;
– TUNER or TAPE source is pressed;
– the CD has reached the end.
Selecting a different track
During playback, you can use SEARCH ¡ , ™ to select a
particular track.
– If you have selected a track number in the stop or pause
position, press PLAY/PAUSE 2; to start playback.
• Press SEARCH ™ once briefly for the next track, or press
repeatedly until the desired track number appears in the
display.
• Press SEARCH ¡ once briefly to return to the beginning of a
current track.
• Press SEARCH ¡ more than once briefly for a previous track.
Finding a passage within a track
1. Press and hold down SEARCH 5 or 6 on the remote control
(or ¡ , ™ on the set).
• The CD is played at high speed and low volume.
2. When you recognize the passage you want, release the
SEARCH controls.
8
CD
TU NE R
CD
TU NE R
TA PE
PR OG
ST OP
SE AR CH
PL AY /PA US E
BA ND
FM MW
LW
CD
TU NE R
TA PE
PR OG
ST OP
SE AR CH
PL AY /PA US E
BA ND
FM
MW
LW