Yamaha YVC-300 Benutzerhandbuch Seite 16

■ Checking that the connection has been made correctly
After the connection is established, perform the following steps to check that the PC recognizes the
product correctly.
Note
The items and options in the setting window may vary depending on your PC environment.
1 Open the Control Panel on your PC.
• In Windows 7, click "Start" - "Control
Panel".
• In Windows 8.1, or 10, right-click the
bottom left corner of the Start screen, and
then click "Control Panel".
2 Click "Hardware and Sound" - "Sound".
The "Sound" window appears.
3 Click the "Playback" tab.
Click
4 Check that "Yamaha YVC-300" is set as
a default device in the "Speakers" field.
If not, click "Yamaha YVC-300" and then
click "Set Default".
Tip
In most cases, simply connecting the product to a
PC automatically sets "Yamaha YVC-300" as a
default device.
5 Click the "Recording" tab.
Click
YVC-300 User's Manual
Check
15