How To Use - Clean Air Optima CA-703 Gebrauchsanweisung

How to use

Power
Press the "POWER" button, the button lights up blue, the device starts to dehumidify.
The dehumidify indicator light, lights up blue, the purify Ion/UV indicator light, lights up green.
Press the "POWER" button again, the device turns off. All indicator lights go out. The fan will
stop 10 seconds later.
The power indicator will flicker in low temperature condition, it means that the device
is defrosting, the fan will keep working, but the cryogenic chip stop working.
Timer
Press the "TIMER" button to set 0-24 hours timing. Press the button one time, the timer
will increase with one hour.
When the device is operating, the timer that is set indicates when the device switches off.
If the device is in stand-by mode, the timer that is set is to instruct the device when to turn on.
If you press the button for 5 seconds, the LED display can show the room temperature
for 5 seconds.
6