Anycom HCC-250 Bedienungsanleitung Seite 25

Table 1: Power on/off
CURRENT STATUS
FUNCTION
PHONE
Turn On
Turn Off
Table 2: Pairing/Connections
CURRENT STATUS
FUNCTION
PHONE
Enter pairing
mode
Erase all paired
profiles
Pair Car-Kit with
Power on
phone
Connect (CarKit Standby
with phone) (disconnected)
Disconnect Standby (connect)
Table 3: Call Functions
CURRENT STATUS
FUNCTION
PHONE
Answer Call Incoming call
Reject Call Incoming call
End Call Talk
Redial Standby
Voice Dialing Standby
Cancel Voice
Voice Dialing
Dialing
OPERATION
HCC-250
Press and hold button
Power Off
least 3 seconds
Press and hold button
Standby
least 3 seconds
OPERATION
HCC-250
Press and hold button
Power Off
least 6 seconds
Press and hold button – for at
Paring Mode
least 3 seconds
Follows your phone`s user
guide to complete pairing
Paring mode
procedure.
Passkey is "0000"
Standby Press button
(disconnected) connection from the phone
Press and hold button
at least 3 seconds or refer to
Standby
phone manual to initiate the
(connect)
connection from the phone
side.
OPERATION
HCC-250
Incoming call Press button
Press and hold button ━ for
Incoming call
at least 3 seconds
Talk Press button
Press and hold button + for at
Standby
least 3 seconds
Press and hold button ━ for
Standby
at least 3 seconds
Press button ━
Voice Dialing
HCC-250 INDICATOR
AUDIO TONE
for at
2 power-up tones
for at
2 power-down tones
HCC-250 INDICATOR
AUDIO TONE
2 power-up tones, and
for at
then 1 pairing tone
1 connecting tone
or set up
1 connecting tone
for
HCC-250 INDICATOR
AUDIO TONE
Key Tone
Key Tone
Key Tone
Page 8
LED INDICATOR
LED Pattern 1
LED Pattern 5
LED INDICATOR
LED Pattern 3
LED Pattern 1
LED Pattern 2
LED Pattern 2
LED Pattern 1
LED INDICATOR
LED Pattern 2
LED Pattern 2
LED Pattern 2
LED Pattern 2
LED Pattern 2
LED Pattern 2
English