Herunterladen Diese Seite drucken

Select Ing Inp Uts - NAIM NAIMUNITI Kurzanleitung

Vorschau ausblenden Andere Handbücher für NAIMUNITI:

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

NaimUniti Quick Start Guide
If an Apple
iPod
is to be used with NaimUniti, connect it using a Naim n-Link cable
(available separately) to the rear panel iPod interface. Do not use the front panel USB
socket to connect an iPod.
Note:
iPods and other MP3 players may also be connected to NaimUniti's front panel
analogue input using a 3.5mm stereo jack cable from their headphone sockets. Player
control via NaimUniti's user interface will not however be possible.
If NaimUniti is to play audio files stored on a
the front panel USB socket. Some MP3 players (not iPod) may also be connected to
NaimUniti via the front panel USB socket.
2 S wit chi ng O n and gett ing Star t ed
Once all connections have been made, switch on NaimUniti using the rear panel
mains
switch. NaimUniti will display a welcome screen and select its CD input.
Note:
If NaimUniti is left unused its display will switch off after a preset time. The "Auto-off"
time can be adjusted within the setup menus.
The NaimUniti display language can be changed. Enter setup mode by pressing the
setup
handset
(
) key, select the language option and use the handset
down
(
) keys to select the desired language. Press the
6
selection. Leave setup mode by pressing the
To play a
CD
pull open the drawer using the handle on the left hand side of the unit
and place the CD on the platter. Place the magnetic puck on the central hub and
push the door closed. NaimUniti will automatically read the disc index when the CD
drawer is closed. If NaimUniti is set up to "auto-play", the CD will play immediately. If
not, press the front panel
be selected or deselected via a setup menu: Press the handset setup key (
setup mode then select
To adjust NaimUniti volume use either the front panel
handset
vol-
and
vol+
of the display.
To control the CD transport use the front panel stop, play,
handset transport keys (

3 Select ing Inp uts

NaimUniti inputs can be selected by pressing the front panel
up
(
) and
down
(
) keys or one of the handset
5
6
Pressing one of the handset
or scrolls through a group of inputs. For example, pressing the
CD
input, while pressing the
DAB
iradio
and
inputs. The default
the Reference Manual. They can be modified via the Inputs setup menu: Press the
handset
setup
(
) key then select the
Full naimuniti installation and operational information can be found in the reference manual
USB
exit
play
button or handset
Inputs
CD
Auto
Play.
>
>
keys. The numerical volume value is shown in the top left corner
).
input selection
keys either directly selects a single input
radio
key scrolls through a group comprising the Fm,
input selection
Handset Buttons
available on line at www.naimaudio.com
memory stick, insert the stick into
ok/list
key to confirm the
key.
play/pause
(
)key. Auto-play can
-vol
vol+
and
buttons or the
prev
and
next
buttons or the
input
button, the handset
input selection
keys.
CD
key selects the
key assignments are described in
option.
Language
up
(
5
) and
4English
Français
Deutsch
Italiano
CD
Name:
Input Trim:
Auto Select:
4Auto Play:
)to enter
Uniti Setup
Headphones
Network Settings
Front Display
4Handset Buttons
Inputs On:Radio
41. FM
2. DAB
3. iRadio
4. Unassigned
English
1/5
5/5
CD
0
Yes
Yes
7/8
1/4

Werbung

loading