Manual Configuration - Silvercrest SWV 300 C1 Bedienungs- Und Sicherheitshinweise

Manual configuration

If you are not using the network default settings on your computer and have
manually set an IP address, you must restore the network settings to Automatically
obtain an IP address. For further details, please read the operating instructions
for your computer.
You then have to configure the wifi range extender via the network cable. To do so, you have to connect
the wifi range extender to your computer. Use the network cable included with the device. Insert one
end of the network cable into the WAN/LAN socket (6) or the LAN socket (7) of the wifi range
extender and the other end into the LAN socket of your computer.
Open the Internet browser on your computer. Enter http://repeater.setup in the address line of the
Internet browser and confirm the entry with the Enter button.
The login window of the wifi range extender opens. Select the desired language and enter admin as
the user name and password. Then click on the Submit button. The configuration menu of the wifi
range extender will then open.
SilverCrest SWV 300 C1
English - 189