Controls - App Required - Sonus Faber Gravis Serie Bedienungsanleitung

4.3 CONTROLS — APP REQUIRED
Your Gravis subwoofer incorporates an advanced, digital control system. Conventional analog rotary
potentiometers and switches (except for the Volume control) have been replaced by a digital signal processor
(DSP), which enables you to adjust your subwoofer conveniently and accurately.
All parameters, such as volume, cut-off frequency, phase, etc., as well as the automatic calibration function,
can be adjusted with the help of a free custom smart device APP.
The digital control system also eliminates the possibility of unwanted changes to controls and settings.
Note: A Bluetooth 4.0 low-energy Android or iOS device is required to set up and operate this subwoofer.
You can download the "GRAVIS SUB CONTROL" APP from the Apple
A "Quick Start Guide" that describes the app functionality is included in the subwoofer packaging.
Please note that your mobile device must support Bluetooth
devices sold as of mid-2013. If necessary, check the accompanying documentation for your mobile device or
contact the manufacturer's support hotline.
Note: In case your mobile device needs a 4 digit code during the subwoofer-pairing procedure, please use the
following: "0000".
EN IT
App Store
®
Standard 4.0. This is the case for the majority of
®
26 26
or Google Play Store .
® ® ®