Dismantling Wiring Trunking; Dismantling The Small Distributor - Obo Bettermann Issmks Montageanleitung

Adjusting the media pole
40 | EN
5. Mount the doors
5 .2

Dismantling wiring trunking

Note! Depending on the ceiling height, the media pole must be removed
again during dismantling of the wiring trunking and placed on the
floor.
1. Release the lids of the wiring trunking
wards out of the media pole.
Fig . 11: Dismantling wiring trunking
2. Slacken the fastening screws of the wiring trunking
the wiring trunking
5 .3

Dismantling the small distributor

1. Dismantle the side panelling
side screens
on page 11).
, on the opposite side.
4 6
upwards out of the media pole.
19
, small distributor door
5
(see "4.1 Mounting the media pole on the wall"
5
and pull them up-
19
and pull
17
and
4
OBO Bettermann