Herunterladen Inhalt Inhalt Diese Seite drucken

Maintenance And Cleaning; Environment Protection - Jata Electro FR1045 Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 19
Cold Zone Technology
• - The deep fryer works with Cold Zone Technology. The heating element is at a considerable distance from the
base of the tank and the oil is heated particularly above it.
• - This creates two zones: a warm zone on top of the heating element (up to approx. 190 °C) and a cold zone
(approx. 85 °C).
• - The consequence of this difference is that the food waste goes down to the bottom of the tank, without
burning and offering these advantages:
- The oil can be used for longer.
- The fryer's heating time is shortened.
- Decreases the formation of acrylamide.
"RESET" button (14)
• The deep fryer has a safety device that automatically disconnects it if it should overheat. It may also overheat
if the appliance is connected without oil in the tank or if the oil level is under the minimum level shown on
the tank.
• If this were to happen you must proceed to reset the safety device. To do so, wait for the oil and the resistance
to cool completely.
• Press the button placed under the indication "RESET" (in the back side of the heating element) until you hear
a "click" indicating that the thermostat has rearmed. Once this operation done, the deep fryer will operate
normally.
• If the device were to disconnect itself repeatedly, the appliance should be revised by an authorised technical
service.

MAINTENANCE AND CLEANING

• Before you proceed to cleaning it, ensure the fryer is unplugged from the mains.
• Remove the heating element (4) by pulling upwards.
• The basket and the tank can be cleaned with soap and water, taking care to rinse and dry them carefully
afterwards.
• The lid can be cleaned with a dampened cloth and do not immerse in water neither into the dishwasher.
• The resistance may be cleaned with a damp cloth. Never immerse in water.
• Clean the outside of the appliance with a damp cloth.
• Do not use chemical or abrasive products, such as metallic scourers, which may deteriorate the surfaces of
the appliance.

ENVIRONMENT PROTECTION

• Dispose the appliance according to the local garbage regulations.
• Never throw it away to the rubbish. So you will help to the improvement of the environment.
12

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis