Gestra RK Serie Ergänzung Zur Betriebsanleitung Seite 12

Fitting the RK stroke limiter
To remove the spring cap of devices with
DN 15 to DN 32, proceed as follows:
 Using angled pliers, bend the tab (1) of the
spring cap (3) down slightly (1.).
The tab must be level with the edge of the
spring cap.
 Rotate the spring cap so that it is
no longer held by the grooves (2) (2.).
 Lift the spring cap upwards and
out of the device.
The spring cap cannot be reused. Therefore,
use the supplied new spring cap for
retrofitting.
 Dispose of the old, removed spring cap
in accordance with local regulations.
Continued
1
2.
3
EN
1.
2