Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
RLR301
1.
Protective cover
2.
Distance ring
3.
Blade protection
4.
Blades
5.
Body
CHARGING THE BATTERY
Make sure that the remover is off before you connect the charger.
The full charging of the battery takes 8 hours. When the appliance is
connected to the charging unit, the light is green.
After the lint remover is charged, unplug the power cable and
remove the charger from the socket.
USE OF LINT REMOVER
WARNING: The lint remover should not be used on buttons, zips,
stripes, sticky labels, labels, seams, etc. It may cause the deformation
of the remover or the garment.
WARNING: Before attempting to clean the fabric, try to operate the
remover in an unobstructed area of the fabric.
Remove the protective cover (1). Turn on the remover. Move around
the fabric. Regularly empty the lint tank (6).
CLEANING AND MAINTENANCE
Regularly empty the lint tank. Unscrew the blade cover, remove the
blades. Clean all parts with a brush. Do not immerse the appliance in
water.
6.
Lint tank
7.
Charging indicator
8.
Supplying socket
9.
On/Off switch
4
Werbung
Inhaltsverzeichnis
