Johnson Leopardo Betriebsanleitung Seite 11

* The cold air significantly reduces the temperature of the air and quickly cools the hair preparing it
for the next phase.
Ionisation (G)
Press key (G) to activate or deactivate the ionising effect. The activation of the ionising effect is
indicated on the display (N) with the symbol (N2).
Ionising device
When turned on, the ionising device emits a flow of atoms, which, on modifying their electrical
charge, become negative ions (the atom becomes a negative ion when it gains an electron, and
vice-versa, it becomes a positive ion when it loses an electron).
If used correctly, the negative ion is beneficial for our body; in fact, the hot airflow charged with
negative ions dries the hair in a more natural and revitalising way.
The ionised airflow reduces the size of the water drops by breaking them down into tiny particles,
which can then be absorbed by the hair.
Given their very small size, they position themselves in the hair squama which can absorb them, and
reshape the structure of the keratin making the hair soft and silky to comb.
The remaining part of the tiny drops, which evaporate more quickly, reduce the time necessary to dry
the hair with significant energy saving and less stress for the hair.
The flow of negative ions also contrasts with the static electricity and its annoying symptoms (unruly
hair) especially on thin and frizzy hair.
The airflow charged with negative ions eliminates damaging substances and dust from the hair
surface, restoring shine and lustre.
The hair hydrated in this way and subjected to less stress, reduces the creation of split ends making
the hair shiny and soft.
Speed (H)
To set (increase or decrease) the speed, turn on the hairdryer and repeatedly press key (H) until the
desired speed is reached. Each pressing corresponds to an increment in the speed and once the
maximum speed has been reached, the selector returns to the minimum speed.
When the hairdryer is turned on, the symbol (N7) appears on the display (N), rotating in proportion
to the set speed.
The hairdryer automatically increases the speed if, set at a low speed, a higher temperature is
required. Therefore, a slow airflow speed CANNOT be obtained at a high or medium temperature.
Temperature (L)
To set (increase or decrease) the temperature, repeatedly press the temperature key (L) until the
desired temperature is reached. Each pressing corresponds to an increment in the temperature and
once the maximum temperature has been reached, the selector returns to the minimum temperature.
ATTENTION: the hot air function cannot be activated if the cold airflow function is selected; press (F)
to turn off the cold air function.
The activation of hot airflow is indicated on the display (N) with the lighting up of the symbols (N5).
N5-3 high temperature
N5-2 medium temperature
N5-1 low temperature
The display (N) also shows the temperature of the air outflow expressed in centigrade (N6).
11