Johnson Leopardo Betriebsanleitung Seite 10

A. ON/OFF key
F. Cold airflow key
G. Ionising key
H. Speed key
L. Heating key
M. Tourmaline grill
N. LCD display
N2. Ionising symbol
N3. Cold air function symbol
N5. Temperature intensity indicator
N5-1. low temperature
N5-2. medium temperature
N5-3. high temperature
N6. Temperature indicator in °C
N7. Speed symbol
O. Filter
P. Air inlet
Q. Air outlet with tourmaline grill
R. Side air outlet
T. Concentrator
U. Diffuser
Make sure your hands are completely dry before connecting the plug to a power outlet.
Press the ON/OFF button (A) to turn the appliance on.
When the hairdryer is turned on, the LCD display lights up with the operating symbols indicating the
basic settings of the appliance.
Each time the hairdryer is turned on, it always starts operating on the lowest speed and lowest
temperature.
Tourmaline (M)
The front grill (M) for the air discharge is covered with Tourmaline, which transfers its beneficial
effects to the air as it passes through. This facilitates the ionising process leaving the hair bright, silky
and revitalised.
Cold air (F)
Press button (F) to activate or deactivate the cold air outflow after turning on the hairdryer. The
activation of the cold air is indicated on the display (N) with the symbol (N3).
ATTENTION: If the cold airflow function is selected, the Temperature key (L) and the Speed key (H)
ONLY allow the speed to be changed and NOT the temperature!
It is recommended to use cold air in the following way:
* Style the hair with a brush, roll the hair sections and heat the curls with the hot air.
* When the hairstyle is formed, turn on the cold air for 15-20 seconds to give more body and
resistance to the style.
* Use the air concentrator (T) to make the hairstyle last even longer.
INSTRUCTIONS FOR USE
10