Audio-Technica ATH-ANC40BT Benutzerhandbuch Seite 9

Using as Headphones (Wired Connection)
Connect the supplied connection cable to the battery jack on the headphones. Turn the volume of the connected
device to the minimum level, and connect the stereo mini plug of the connection cable to the headphone terminal.
When using on an airplane, use the provided airplane conversion adapter as shown in the gure below.
Turn the NC switch to ON to use the noise-cancelling function.
*These headphones feature a play-through function that enables music playback even if the headphones have run
out of battery power.
*The Bluetooth function is stopped when using the headphones with a wired connection.
■ Example of wired connection
Portable player, etc.
Airplane conversion adapter
Airplane seat
(included)
About the earpieces
About Earpieces Sizes
It may be difficult to hear the bass sounds if the earpieces do not fit snugly in your ears. These headphones come
with silicon earpieces in four sizes (XS, S, M and L). At the time of purchase, the M size silicon earpieces are
attached to the headphones. To ensure the best sound quality, it may be necessary to change the size to that
which is best suited for you, and adjust the earpieces inside your ears for a snug fit.
Cleaning the earpieces
Remove earpieces from the headphones and clean them with diluted detergent. After cleaning, dry before use.
Replacing the earpieces
Remove each old earpiece, and mount the new earpiece over the stem up to the
stem's base.
Note:
・
Periodically remove and clean the earpieces as they become dirty easily. Using with dirty
earpieces may cause the headphones themselves to become dirty, resulting in deteriorated
sound quality.
・
Earpieces are consumable parts which degrade through storage and use. If the t has become
loose or if the earpieces appear to have degraded, purchase replacements.
・
When reattaching earpieces to the headphones, be sure to check that they are securely attached.
Injury or illness may occur if the earpieces are left inside the ear.
Cleaning
Get into the habit of regularly cleaning your headphones to ensure that they will last for a long time.
Do not use alcohol, paint thinners or other solvents for cleaning purposes.
● About headphones, Bluetooth receiver, and power supply section
Wipe the main unit with a dry cloth. Foreign matter can accumulate within the earpiece attachment.
Continued use while dirty can cause the earpiece to detach easily. Wipe the dirt away periodically. Avoid touching the sensitive
port that emits sound; doing so can cause breakage or malfunction.
● About the cable, USB charging cable, connection cable, and neck band
Wipe your cables with a dry cloth after use if there is sweat or other dirt present. Using an unclean cable continuously will deteriorate
and harden the cable, resulting in headphone malfunction.
● For long-term storage, keep the headphones in a well-ventilated place without high temperatures and humidity.
φ 3.5mm
Stereo mini plug
Connection cable
(1.2m) (included)
English
How to Use
9