Technical Specifications - Fastbind ELITE Handbuch

Section 10

TECHNICAL SPECIFICATIONS

Summary Table
rev. d5 Elite Multilang
© 2004.12 Maping Co
BINDING POSSIBILITIES
Applications
BINDING SPECIFICATIONS
Binding material
Binding thickness
Maximum sheet size
Max. thickness for cover material
Performance (cycles / hour)
Performance (books / hour)
Working time
HEATING SYSTEM
Operating voltage and fuses
Heating system
Overheating protection
FUNCTIONS
Roughening
Hot melt application
Turntable and spine pressing
ACCESSORIES AND SUPPLIES
Accessories:
Supplies:
CERTIFICATES
1 - 21
TECHNICAL SPECIFICATIONS
Softcover bindings
Cardboard covers
Transparent covers
Hardcover bindings
Hardcover (supply)
Personalized hardcovers (made with Fastbind H530)
Scratch pad (pad without covers)
Duo Strip binding
Lay fl at -binding
Normal uncoated paper
Coated and colorcopy paper --- with roughener
0,1 - 40 mm (0,004 - 1,57 inch)
320 x 235 mm / 12,6 x 9,2 inch
2
400 g/m (depending on cardboard properties)
Up to 450 pcs
Up to 180 pcs (user dependent)
Unlimited continuos (machine is used) working time
630 W -- 230V or 115V; See machine type plate
External switch off timer recommended
Electrical; thermostat controlled
Thermofuse (~192 °C)
Twin roller roughener with page grain opening system
From above; glue layer thickness adjustable (based on
number of gluing cycles)
Single double action lever operating both the turntable
and spine pressing
1) Hardcover toolset including hardover paperguide
and hardcover nipping tool for spine pressing
2) Trimmer for cutting the cover
3) External timer switching the machine off after pre-
set delay.
Softcovers, Transparent covers, Manager covers,
Hardcovers and duo strips plus materials both for the
hard and soft cover production.
CE
www.maping.com