Making Adjustments; Adjusting The Stylus Pressure - Yamaha GT-5000 Bedienungsanleitung

Making adjustments

„ Adjusting the stylus pressure
Adjust the tonearm so that the appropriate stylus pressure
will be applied to the record.
1
Remove the tonearm from the arm
rest and move it slightly towards the
record
NOTICE
Take care that the stylus does not contact any
part of the unit.
2
Turn the counter weight so that the
tonearm will be horizontal
1
Toward : Counter weight moves forward
1
on the tonearm
Toward : Counter weight moves backward
2
on the tonearm
2
3
Return the tonearm to the arm rest
4
Turn the VTF dial so that the "0"
marking will be aligned with the center
line on the back end of the tonearm
Center line
Note
When turning the VTF dial, use your fingers to
hold the counter weight in place so that it will not
rotate.
5
Turn the counter weight to set the VTF
dial markings to the stylus pressure
specified for the cartridge
Note
• Turning the counter weight also turns the VTF
dial.
• Use a stylus pressure gauge to set an accurate
stylus pressure.
19