urmet 1092/252H Bedienungsanleitung Seite 15

CAMERA MANAGEMENT WITH CONTROL KEYPAD
The camera and the Zoom can be remotely managed by any control keypad equipped with RS-485
interface (for ex. the keypad 1092/621); in this case, the communication parameters must be manually
configured via camera menu (as above described), in order to match the keypad ones (ID, Protocol, Baud
Rate).
From camera menu, that can be accessed by the control keypad, the user can perform all the
customizations, as described in this manual.
Use the following commands:
•
210 SHOT to access to the Menu
•
the Joystick to scroll the Menu options and change their values
Note
For keypad specific functions and access commands, see the control keypad manual.
CLEANING THE DEVICE
•
Rub delicately with a dry cloth to remove dust and dirt.
•
Dip the cloth in neutral detergent if dirt cannot be eliminated with a dry cloth alone.
•
Do not use volatile liquids (such as petrol, alcohol, solvents, etc.) or chemically treated clothes to clean
the device to prevent deformation, deterioration or scratches to the paint finish.
DS 1092-223 15