Knight Digi Set Serie Bedienungsanleitung Seite 9

'DOWN' KEY TO
RESET RACK COUNT
DOWN KEY TO RES
INIT CHARGE CNT_
'SCROLL' TO CHAN
GE DISPLAY NAME_
CHANGE PASS CODE
0000 PRESS ENTER
ARE YOU SURE?
0000_IS NEW CODE
MACHINE TYPE:
DOOR_
Continue on next page
0900869 Rev: C (02/04)
If you wish to clear the rack counter, press the DOWN button. The display
will briefly flash to the rack counter to verify that it was set back to zero, and
will then return to the display at left. Press ENTER to continue.
If you wish to clear the initial charge counter, press the DOWN button. The
display will briefly flash to the counter to verify that it was set back to zero,
and will then return to the display at left. Press ENTER to continue.
This menu item allows you to change the display name. Press the SCROLL
button once and you will see a screen with the current display name
showing. Use / to change the selected character (the one that is
underlined) and SCROLL to advance to the next character. When finished,
press ENTER to continue.
This menu item allows you to change the pass code. Use
selected character (the one that is underlined) and SCROLL to advance to
the next character. When finished, press ENTER to continue
If you changed the pass code in the previous menu, you
will be prompted to confirm your choice. If you wish to pick
a different number, press SCROLL to return to the
previous menu, otherwise press ENTER to continue.
Use SCROLL to choose door or conveyor as the type of dishmachine in use,
then press ENTER to continue.
/ to change the
Page 9 of 52
E
N
G
L
I
S
H