Knight Digi Set Serie Bedienungsanleitung Seite 11

DETER LOW DETECT
OFF_
DET LO LEV OVERD
OFF_
RINSE LOW DETECT
OFF_
RIN LO LEV OVERD
OFF_
SANIT LOW DETECT
OFF_
SAN LO LEV OVERD
OFF_
SCROLL & DOWN TO
RESET EVERYTHING
Wrap around to first menu item
0900869 Rev: C (02/04)
This menu will only appear if you chose PROBELESS as type of detergent
feed. Use SCROLL to turn the low product detect feature on or off for
detergent, then press ENTER to continue.
If you turned low detect "on" in the previous step, then you
will see this prompt which lets you over-ride the alarm and
allows the pump to continue. Use SCROLL to turn the
over-ride feature on or off, then press ENTER to continue
Use SCROLL to turn the low product detect feature on or off for rinse, then
press ENTER to continue.
If you turned low detect "on" in the previous step, then you
will see this prompt which lets you over-ride the alarm and
allows the pump to continue. Use SCROLL to turn the
over-ride feature on or off, then press ENTER to continue
Use SCROLL to turn the low product detect feature on or off for sanitizer,
then press ENTER to continue.
If you turned low detect "on" in the previous step, then you
will see this prompt which lets you over-ride the alarm and
allows the pump to continue. Use SCROLL to turn the
over-ride feature on or off, then press ENTER to continue
You will be prompted if you wish to reset the system. This function is
recommended for new installations and allows you to clear all memory and
set the unit back to default parameters.
Hold down on the SCROLL and DOWN buttons until you see the message
"RESETTING EVERYTHING" then release both buttons. After a few
seconds, the memory will be cleared and the display will return to the display
at left. Press ENTER to continue.
E
N
G
L
I
S
H
Page 11 of 52