Knight Digi Set Serie Bedienungsanleitung Seite 8

•
If you chose to use PROBE mode, you will see the
following menu...
E
N
DETER CONCEN:
G
25 KNIGHT UNITS
L
I
Detergent concentration is set in Knight Units. A
S
chart is provided on page 48 to show the
H
relationship between Knight Units and drops of
titration. Use the chart to determine the number of
Knight Units needed for your desired titration.
Use / to choose from 0 to 100 Knight Units,
then press ENTER to continue.
DISPLAY DET CONC
ON_
This setting allows you to choose if you wish to
see the actual concentration reading on the
display during normal operation. Use SCROLL to
turn the concentration display on or off, then
press ENTER to continue.
ALARM DELAY:
180 SEC
Alarm delay is a time frame that the detergent
setpoint is expected to be reached within. If the
detergent setpoint is not achieved within the set
time, the alarm will sound intermittently until the
problem is resolved or power is cycled.
For door machines, this setting should be
calibrated to 5 – 10 seconds shorter than the
washcycle. For conveyor machines, should be
slightly longer than the time it takes for the unit to
achieve the setpoint with a fresh tank of water.
Use / to choose from 0 to 512 seconds, then
press ENTER to continue.
DETER FEED LIMIT
OFF_
Detergent feed limit works in conjunction with
alarm delay. When this feature is "on", and the
detergent setpoint is not reached within twice the
alarm delay, the alarm will become continuous
and detergent feed will be halted until the problem
is resolved or power is cycled.
Use SCROLL to turn the feed limit on or off, then
press ENTER to continue.
Page 8 of 52
•
If you chose to use PROBELESS mode, you will
see the following menu...
INIT DET CHARGE:
01 SEC
The initial charge feeds detergent to achieve
working concentration when the dishmachine is
initially filled with a fresh tank of water. The
available timing range depends on whether door
or conveyor mode is selected:
DOOR: 1 to 64 seconds
CONVEYOR: 1 to 128 seconds
Use / to set the initial charge time, then press
ENTER to continue.
DET RECHARG TIME
01 SEC
The recharge feeds detergent to maintain the
working concentration as rinse water dilutes the
dishmachine. The available timing range is 0 to
255 seconds.
Use / to set the recharge time, then press
ENTER to continue.
RECHARGE AFTER
01 RACKS
This setting allows you to choose how many racks
will be counted before triggering the recharge
feed. The range is 1 to 99 racks.
Use / to set recharge rack count, then press
ENTER to continue.
Continue on next page
0900869 Rev: C (02/04)