Normal Operation - Royal Rx-330 Benutzerhandbuch

Normal Operation

How to brew coffee? Please follow the following steps:
1. Assemble the Filter Pan, and put appropriate amount (depending on your
taste) of coffee on the Filter Paper. The recommended amount of coffee is
75g~90g for 1.6 liter~1.8 liter of water.
2. Slide the Filter Pan into position.
3. Pour 1600 to 1800 ml of water into the Water Reservoir.
4. Place an empty Glass Decanter or Vacuum Pot or Thermos at the correct
position under Filter Pan.
5. Switch the power ON, the "In Use" Indicator will light up; a process of
coffee brewing has begun.
6. Coffee will start to flow into the Decanter or Vacuum Pot or Thermos.
7. When the "In Use" Indicator light turns off, the coffee brewing cycle has
been completed. (RX Mold)
8. (RXV, RXB, RXK Molds) Turn off the Power Switch, and lock the cap of
Vacuum Pot or Thermos, a pot of coffee can now be served.
9. Although the machine has a overflow pipe for the Reservoir in case the
amount of water in Reservoir exceeds 2.3L, we still recommend that
the user should be careful that the maximum water does not exceed 1.8
liter to avoid overflow at the Decanter.
10.Since there will always be some water remaining in the hoses, the boiler
etc. of the Machine: if the Machine will not be used for some time, or if the
Machine should be removed, you should always pour out the remaining
water in the Machine, and clean it for storage.
11.When the Machine is to be used again after a long period, please repeat
Installation
steps 1~8 of
12.If the Machine is not to be used for a short time, please clean the Machine
with fresh water before using again.
Please set the switch OFF, when coffee brewing process
is completed.
.
- 6 -