Installation - Royal Rx-330 Benutzerhandbuch

Installation

(When the machine is used for first time)
1. Place the machine on a firm and horizontal table.
2. Slide the filter pan into position.
3. Pour cold water (no more than 2.2 liter) into the Water Reservoir, wait
for 1 minute for water to force the air out of the machine.
4. Place an empty Glass Decanter, Vacuum Pot or Thermos at correct
position under the Filter Pan.
5. Turn the Switch ON and the "In Use" Indicator lights up.
6. HOT WATER starts to flow into Glass Decanter, Vacuum Pot or Thermos.
7. 4~5 minutes later, the "In Use" Indicator will turn off. The brewing process
has ended.
8. You should repeat the above process 2 to 3 times to clean the internal
parts of the machine before brewing coffee for first time.
9. During above operation, it is normal to hear some hissing sound
of water and to see some water vapor coming out.
Never pour hot water into the reservoir.
Please check that your Filter Pan is assembled correctly:
• Put the spring and wedge at the bottom of the Filter Pan.
• Place the Filter Paper on the spring in the Filter Pan.
Caution! Hot Surface!
DO NOT keep the EMPTY decanter on Warming Plate.
- 5 -