Bpt XTDS10MP Bedienungsanleitung Seite 10

9600 bps (default) OFF
19200 bps OFF
38400 bps ON
Extended ID D8
1~99 OFF
1~3999 ON
Video output connection
RS485 connection
The Dome videocamera is fi tted with a RS-485 receiver that
can be remotely controlled, via an external control device, for
example a joystick or a DVR DVR.
RS-485: connect TXA (Tx+) and TXB (Tx-) of the control devices
RS485 (KBD, DVR...) to TRX+, TRX- of the Dome videocamera.
The RS-485 does not support using a star connection layout.
For such a connection type, you a serial distributor.The RS-485
supports a distance of 1.2 km, so for greater distances we
suggest using repeaters.
Connecting the alarms
From AL1 to 4 (ALARM IN)
To receive and answer from the videocamera about an event,
you can use magnetic sensors, PIR or others
GND
Connect the ground to the Alarm input and/or the Alarm
output to the GND connector.
NO/NC (Clean contact relay output)
The video camera may activate external devices, such as
buzzers or lights via a relay switch. Connect the device to the
NO connectors (NC) (Alarm Out) and COM (Common).
10 - 24803020 15-09-2014
Connecting up to the power supply
ON OFF
Connect the 24 VCA 40VA power supply to the Dome vide-
ON ON
ocamera.
OFF OFF
Mounting
After setting the switches and making the necessary con-
nections, as described above, you can fi t the videocamera.
You can install the videocamera onto a supporting structure
that can hold 3 kg of weight.
Dismantling and disposal
Always make sure you comply with local laws before dismantling
and disposing of the product.
The packaging materials (cardboard, plastic, and so on) should
be disposed of as solid urban waste, and simply separated from
other waste for recycling.
Other components may contain pollutants. They must therefore
be removed and handed over to fi rms authorized to collect and
dispose of them.
DO NOT DISPOSE OF IN NATURE!
The data and information in this manual may be changed at any
time and without notice.