System Status - elobau 485EPF series Originalbetriebsanleitung

The map of PLC input bytes is described in the table below:
(1 byte)
Number I/Os
Diagnostic code
The following table describes the input map of PLC:
B7 B6 B5 B4
è
If the eloProg system includes a field bus module (485EPFPD, 485EPFCO oder 485EPFDN), the
configuration software report will include a table with the I/O index for all the inputs, field bus
inputs, probe and safety outputs in the electric circuit.
eloProg 485EPF.. - Vers. 1.2
B3 B2 B1 B0

SYSTEM STATUS

B0=1: Mosaic online / B1=1: Diagnostic(s) present
Inputs
Minimum: 1 byte
Maximum: 16 byte
Fieldbus input
Probe
OSSD
Minimum: 1 byte
Maximum: 2 bytes
DIAGNOSTICS (2 bytes)
see: Table 4 - Table 5 - Table 6
Fieldbus input
5