Ravcore HURRICANE Installationsanleitung Seite 10

EN
ASSIGN A MACRO
Click any mode (M1~MR) and any key (G1~G10), choose "Assign
a Macro" and "Macro Manager" get into the Macro Editor
interface, then you can set the Macro Function by the following
instructions.
1. Click "NEW" and name it for the new macro definition function
in the Macro List.
2. Choose a name to set function, click "Start Record" and then
in "Key Press Sequence"to input the key as you want. (ok for
single key or combo key).
a) If needed, during set the key function, by choosing "Record
Delays between Key Commands can make the function de-
layed for a time to reflect when use the key.
b) You can record macro sequences with a defined delay
between them. In order to define the delay, check „Record
delays between key commands" option.
c) In order to edit the duration of time intervals, right-click the
screen and select „Edit Delay".
10