Control Panel; Stand-Alone Mode - LiveLine VDPLBTL Bedienungsanleitung

7.1

Control Panel

Control Buttons
Access the control panel functions using the four panel buttons [7] located below the display [6].
Button Function
MENU to access the menu, quit the current function without saving the setting, or quit the
menu
UP to scroll upward in a list of functions or options, or increase a value
DOWN to scroll downward in a list of functions or options, or decrease a value
ENTER to confirm and save a selected option or value
7.2 Menu
menu submenu
d 1
3-CH
d512
d 1
8-CH
d512
C 1
C-- ...
C 7
P
P-- ...
P
S 1
S--
S100
Snd1
Snd
Snd2
u
SenS
u100
r
r255
g 0
U--
g255
b 0
b255
OFF
dIM1
dIM
dIM2
dIM3
On
SET
OFF
7.3

Stand-Alone Mode

In stand-alone mode, the device runs one of the built-in programs. You can also select one of the built-in
static colours, or define your own custom colour.
Note: Make sure to unplug any connection from the DMX input of the device if you want to use it in
stand-alone mode. A device in stand-alone mode may transmit DMX signals that could interfere with the
DMX signals from the controller.
description
3-channel or 8-channel DMX mode
Built-in static colour
(1 = R, 2 = G, 3 = G, 4 = GB, 5 = RB, 6 = RG, 7 = RGB)
1
Built-in programme
(P1 = 3-colour switching, P2 = 3-colour fade, P3 = 7-colour switching,
P4 = 7-colour fade)
4
Programme speed from slow to fast
Sound-activated programme 1 or 2
0
Sound sensitivity from low to high
0
Custom static colour
Dimmer speed
(OFF = off, dIM1 = fast, dIM2 = middle, dIM3 = slow)
Remote control
www.liveline.be
VDPLBTL
page 6