Technical Specifications - LiveLine VDPLBTL Bedienungsanleitung

Replacing the Fuse
Only replace the fuse by a fuse of the same type and rating.
1. Before replacing the fuse, switch off the device and unplug the mains lead.
2. Open the fuse holder [1] with an appropriate screwdriver.
3. Remove the old fuse and install the new fuse in the fuse holder.
4. Replace the fuse holder in the housing.
11.

Technical Specifications

power supply
charging time
autonomy
full mode
single colour mode
power consumption
IP rate
LEDs
beam angle
field angle
dimensions
weight
VDPLBTL
100-240 VAC, 50/60 Hz
6 h
± 8 h
± 20 h
12 W
IP30
3 x 3 W RGB/FC high-power LED
16°
32°
108 x 108 x 136 mm
1.3 kg
www.liveline.be page 10