Installation; Operating Modes - HQ Power VDPLP4 Bedienungsanleitung

4. Installation

There are 2 methods to install your VDPLP4:
1. Open the 2 supporting panes and cross them to create a support on the back of the VDPLP4. Place the
VDPLP4 on a flat surface. The angle can be adjusted by adjusting the position of the crossed panes.
2. Hang the panel onto a screw in the wall. Use the U-shaped hole on the back of the panel.
• Have the device installed by a qualified person, respecting EN 60598-2-17 and all other applicable norms.
• The carrying construction must be able to support 10 times the weight of the device for 1 hour without deforming.
• The installation must always be secured with a secondary attachment e.g. a safety cable.
• Never stand directly below the device when it is being mounted, removed or serviced. Have a qualified technician
check the device once a year and once before you bring it into service.
• Install the device in a location with few passers-by that is inaccessible to unauthorised persons.
• Overhead mounting requires extensive experience: calculating workload limits, determining the installation
material to be used... Have the material and the device itself checked regularly. Do not attempt to install the
device yourself if you lack these qualifications as improper installation may result in injuries.
• Make sure there is no flammable material within a 0.5m radius of the device.
• Have a qualified electrician carry out the electric connection.
• Connect the device to the mains with the power plug. Do not connect it to a dimming pack.
• The installation has to be approved by an expert before the device is taken into service.

5. Operating Modes

• DMX512 Mode
CHANNEL 1
CHANNEL 2
CHANNEL 3
CHANNEL 4
CHANNEL 5
CHANNEL 6
CHANNEL 7
CHANNEL 8
CHANNEL 9
CHANNEL 10
CHANNEL 11
CHANNEL 12
CHANNEL 13
• Stand-alone Mode Via Remote Controller
With the remote controller you can make your own custom colour and fade modes.
VDPLP4
Description
EFFECT CHANNEL
RED
GREEN
BLUE
RED
GREEN
BLUE
RED
GREEN
BLUE
RED
GREEN
BLUE
From To
0 60 Effect mode 1
61 121 Effect mode 2
122 182 Effect mode 3
183 242 Effect mode 4
245 255 Effect mode 5
0 255 0 – 100% - segment 1
0 255 0 – 100% - segment 1
0 255 0 – 100% - segment 1
0 255 0 – 100% - segment 2
0 255 0 – 100% - segment 2
0 255 0 – 100% - segment 2
0 255 0 – 100% - segment 3
0 255 0 – 100% - segment 3
0 255 0 – 100% - segment 3
0 255 0 – 100% - segment 4
0 255 0 – 100% - segment 4
0 255 0 – 100% - segment 4
4
Function
VELLEMAN