User manual / Bedienungsanleitung
Place the tonearm with the cartridge on the red-marked measuring area.
Then, slowly lower the tonearm so that the stylus is centred on the red
dot. To avoid false measurements, the body of the cartridge should never
Weight Watcher touch
contact the
.
The display now shows you the weight in grams. If this does not match
the cartridge manufacturer's specification, lift the tonearm and correct the
tracking force.
Weight
Check your final adjustments of the tracking force again with the
Watcher touch.
- Please note -
Weight Watcher touch
Horizontal placement of your
is required for accurate
measurement of tracking force.
Do not touch the surface (calibration area, showing the Clearaudio logo)
during the measurement process to ensure an accurate measurement.
Measuring area
Calibration area
Made in Germany
Page / Seite 5