Delivered Items; Measuring Procedure - Clearaudio Weight Watcher touch Bedienungsanleitung

User manual / Bedienungsanleitung

1. Delivered items

Weight Watcher touch
• incl. 2x CR2032 batteries
• Calibration weight 100g
• User manual
Further analogue accessories available at: www.analogshop.de

2. Measuring procedure

Weight Watcher touch
Before using the for the first time, remove the
battery seal from the battery compartment on the back of the device.
Select the unit
To adjust the tracking force we recommend using the default setting: 'g'.
If you want to use another unit of measurement, you can select it by 'MODE'.
Weight Watcher touch
Determine the correct position of your on the
turntable by carefully positioning your tonearm with the cartridge in the
playing area of the turntable.
Weight Watcher touch
The measuring area of the (marked 'Measuring
area') is at the same height as a 200g vinyl pressing, so the measurement
should be made without a record on the platter.
Weight Watcher touch
Carefully place your on the turntable's surface.
Weight Watcher
Make sure that all 4 small nubs on the underside of the
touch
rest on the turntable platter and not in the label recess of the platter.
This ensures accurate measurements.
Weight Watcher touch
Now you can switch on the by tapping on the 'ON /
OFF' area. After switching it on, all elements of the display are displayed for
approx. 3 seconds before returning to '0.0'.
© clearaudio electronic GmbH
Page / Seite 4