Use And Operation; Care And Maintenance; Environment Concerns; Declaration Of Conformity - Klarstein 10027691 Bedienungsanleitung

Verfügbare Sprachen

• Assemble the parts together. Make sure the whole coffee bean chamber is empty and clean.

• Fill to chamber with whole coffee beans.

• Plug the product into a standard 220-240V AC electrical outlet.

• Set the variable grind selector as showed in Figure B.

• Turn the doser/time switch to the number of cups you wish to grind.

• Press the on/off button

• Start the grinding by pressing down the top lid and keep it pressed down during its working.

• Unplug the product from the electrical out let when it is not in use or left unattended.

• Ensure the product is unplugged from the electrical outlet before cleaning it.

• Always clean the product immediately after each use.

• Wash the Lid in warm, soapy water; then rinse and dry thoroughly.

• Wipe clean the inside of the Container and Motor Housing with a soft, damp cloth; then thoroughly

dry them.

CAUTION: Do not immerse the Motor Housing into water or other liquids. Do not use abrasive

cleaners or scouring pads to clean the product. Do not oil or sharpen the grinding blades. Store the

product in a cool, dry place.

According to the European waste regulation 2002/96/EG this symbol on the product

or on its packaging indicates that this product may not be treated as household was-

te. Instead it should be taken to the appropriate collection point for the recycling of

electrical and electronic equipment. by ensuring this product is disposed of correctly,

you will help prevent potential negative consequences for the environment and hu-

man health, which could otherwiese be caused by inappropriate waste handling of

this product. For more detailled information about recycling of this product, please

contact your local council or your household waste disposial service.

Producer: CHAL-TEC Vertriebs- + Handels GmbH, Wallstraße 16, 10179 Berlin.

This produkt is conform to the followring European Directives:

2014/35/EU (Low voltage)

2014/30/EU (EMC)

2011/65/EG (RoHS)

Use and Operation

Inhaltsverzeichnis