Teleco TEV20D Bedienungsanleitung Seite 70

Menu Timeout
Software
Upgrade
Application
Version
Subtitle Mode
Auto TV OFF
Biss Key
Store Mode
Power Up Mode
CEC
CEC Auto Power
On
Speakers
Installation Menu Contents
Automatic
Displays automatic tuning options. Digital Aerial: Searches and stores aerial DVB stations.
channel scan
Digital Cable: Searches and stores cable DVB stations. Analogue: Searches and stores
analogue stations. Satellite: Searches and stores satellite stations.
(Retune)
Manual
This feature can be used for direct broadcast entry.
channel scan
Network
Searches for the linked channels in the broadcast system. Digital Aerial: Searches for aerial
channel scan network channels. Digital Cable: Searches for cable network channels.
Analogue fine
You can use this setting for fine tuning analogue channels. This feature is not available if no
tune analogue channels are stored.
Displays satellite settings. Satellite list: Displays available satellites. You can Add, Delete
Satellite
satellites or Edit satellite settings on the list. Antenna installation: You can change satellite
Settings anntenna settings and/or start a satellite scan. SatcoDX: You can upload or download SatcoDX
data using the related options.
Installation
Displays installation settings menu. Standby Search: Your TV will search for new or missing
Settings
channels while in standby. Any new found broadcasts will be shown.
(Optional)
Clear Service
Use this setting to clear channels stored. This setting is visible only when the Country option
List is set to Denmark, Sweden, Norway or Finland.
Select Active
This setting allows you to select only the broadcasts within the selected network to be listed
Network in the channel list. This feature is available only for the country option of Norway.
First time
Deletes all stored channels and settings, resets TV to factory settings.
installation
Changes timeout duration for menu screens.
Ensures that your TV has the latest firmware. Press OK to see the menu options.
Displays current software version.
This option is used to select which subtitle mode will be on the screen (DVB subtitle /
Teletext subtitle) if both is available. Default value is DVB subtitle. This feature is available
only for the country option of Norway.
Sets the desired time for the TV to automatically go into standby mode when not
being operated.
Biss is a satellite signal scrambling system that is used for some broadcasts. If you need to enter
Biss key on a broadcast, you can use this setting. Highlight Biss Key and press OK to enter
keys on the desired broadcast.
Select this mode for store display purposes. Whilst Store Mode is enabled, some
items in the TV menu may not be available.
This setting configures the power up mode preference. Last State and Standby
options are available.
With this setting you can enable and disable CEC functionality completely. Press Left
or Right button to enable or disable the feature.
This function allows the connected HDMI-CEC compatible device to turn on the TV
and switch to its input source automatically. Press Left or Right button to enable or
disable the feature.
To hear the TV audio from the connected compatible audio device set as Amplifier.
You can use the remote control of the TV to control the volume of the audio device.
English - 69 -