Intenso MEDIAARTIST Kurzanleitung Seite 15

h) Connecting with Computer
It is possible to connect this photo frame with a computer. Using the following procedure you
can store files on the internal memory or on a storage medium connected to the photo frame.
(a) Remove all USB-storage mediums connected to the photo frame.
(b) Connect the thin end of the provided USB cable with the mini-USB-Port of the photo frame
and the other end of the USB cable with your computer.
(c) The computer will detect this „New Device" and automatically install the driver. Please wait
until driver installation is completed. Your computer will now show further drives/removable
mediums.
(d) Copy your data as usual. (Drag and drop)
(e) Upon completion of the copy process please remove the photo frame by use of the
Windows-function "Remove hardware disc safely".
Please note: Prior to connecting the photo frame to the computer, the photo frame must have
been started. While the photo frame is exchanging data with the computer it is not possible to
use any USB storage mediums with the digital photo frame.
i) Copying Files
(a) Using the ,  buttons on the remote control please select a file and, subsequently, press
the  button on the remote control. A checkmark  appears besides the file. To select
more than one file please repeat these steps.
(b) Press the OSD button on the remote control. Now, the options Copy and Delete are
displayed on the right side of the display.
(c) Using the ,  buttons on the remote control please select the Copy feature and press the
OK-button on the remote control. Now, you can see all storage media available in the
display.
(d) Use the ,  buttons on the remote control to select the relevant storage medium and
press the  button on the remote control to select the desired storage medium and
subdirectory.
(e) Using the OK-button you can start to copy the files.
(f) Please press the OK-button once again to confirm the "Complete" message.
Please note: If your desired storage medium does not appear in the list, it might be a read-only
medium. Please remove the write protection and re-try copying the files.
GB - 5