Hunter Premium Gebrauchsanleitung Seite 4

3. Mount the Antenna & Insert SIM card
1.3 How to Setup the Camera?
1. Power on the Camera
Switch to ON; camera is ready to work upon motion triggers (screen will not
light up upon "ON"). You can mount it out to work directly after this if default
settings are preferred.
2. Configure Camera Settings
Switch to SETUP, screen will light up. Press M key, you will enter the menu to
view & change settings. Please press arrow keys for navigation and OK key to
confirm settings.
Note! Please switch to ON to enable the camera to work after you get
preferred settings.
3. How to Connect the Camera to Network?
Different from none cellular models, the 3G model has a signal "Searching"
process when you switch the power key to SETUP.
If it comes with a signal bar and no other pop-up, it means the network is
auto-matched and no manual setup is needed. Fill in phones/emails in "Send
to", you will be able to receive photos upon motion triggers.
If it comes with a pop-up "SIM Auto Match failed...", please go to "SIM Auto
Match" under "3G", select "Manual", and fill in local operator APN details in
"Manual Setup", the camera will connect to their network to send photos.
Note! This camera can send photos to 2 phones & 2 emails. It's set to send
photos to phones via MMS, and to emails via SMTP (data). If you prefer more
personalized way of sending, please configure in menu accordingly.