Measuring Functions
Measuring single distance
1
2
Aim active laser at target.
Permament / Minimum-Maximum measuring
1
2
2 sec
Used to measure room diagonals (maximum values)
or horizontal distance (minimum values)
Add / Subtract
1
2
The next measure-
ment is added to
the previous one.
7.332 m
Würth WDM5-12
3
min.
max.
3
The next measure-
ment is subtracted
from the previous
one.
8.532 m
The minimum and maximum distance
measured is displayed (min, max.).
The last value measured is displayed
in the main line.
8.532 m
7.332 m
12.847 m
Target surfaces: Measuring errors
can occur when measuring to col-
i
ourless liquids, glass, styrofoam or
semi-permeable surfaces or when
aiming at high gloss surfaces.
Against dark surfaces the measur-
ing time increases.
3
Stops permanent / minimum-
maximum measuring.
The result is shown in the main line
and the measured value above. This
i
process can be repeated as re-
quired. The same process can be
used for adding or subtracting are-
as or volumes.
EN
7