Multifunctional Endpiece; Distance Unit Setting; Tilt Unit Setting; Timer (Automatic Release) - Würth WDM5-12 Handbuch

Operations

Multifunctional endpiece

Distance unit setting

Switch between the
following units:
2 sec
0.000 m
0.0000 m
0.00 m

Timer (automatic release)

1 2
Würth WDM5-12

Tilt unit setting

2 sec
0.00 ft
0'00'' 1/32 simultaneously
0.00 in
0 in 1/32
Adjust delay of auto-
matic release (max.
60 sec, standard set-
ting 5 sec)
The orientation of the endpiece is
automatically detected and the
i
zero point is accordingly adjust-
ed.
IMPORTANT:
After each change of the end-
piece position the compass has
to be calibrated.
Switch between the
following units:
0.0 °
0.0 %
Once the key is released with the laser
activated, the remaining seconds until
i
the measurement are displayed in a
countdown. The delayed release is
recommended for precise aiming e.g.
at long distances. It avoids shaking of
the device when pressing the measure-
ment key.
EN
5