Sony WRT-807B Bedienungsanletung Seite 12

Parts Identification
4 POWER indicator
Lights when the microphone is on.
5 POWER switch
Turns the microphone ON or OFF.
When you set this switch to ON without holding down any
other button, the microphone enters Transmit mode, and the
signal of the selected channel is transmitted.
The HOLD switch appears when the POWER switch is set
to ON.
Set the HOLD switch to the lock position to prevent an
accidental power cut-off during microphone operation.
Locking the POWER switch
ON
HOLD .
Slide the HOLD switch to the
right with a ballpoint pen or
similar item.
6
(GB)
ON
,
HOLD .
A yellow mark appears
when the switch is in the
hold position.
6 Antenna
7 Battery holder
Insert the battery here.
For details on inserting the battery, see "Power Supply" on
page 7.
8 + (+ selection) / – (– selection/reset) buttons
In Setting mode, use these buttons to select the transmitting
channel and attenuation level, and use the – button to reset
the accumulated battery use time indication to 00:00.
For details on Setting mode, see "Settings" on page 8.