Router Mode - RAVPower RP-WD007 FILEHUB Handbuch

Note: The FileHub does not support smartphone, tablet, or camera
used as USB storage.
Configuring your FileHub (AP / Router / Bridge)
Access Point (AP) Mode
In AP mode, the FileHub is connected to a wired network and other
device can connect to the FileHub (and access the wired network)
via its Wi-Fi connection.
Conf iguration
1. Turn on the FileHub.
2. Connect the FileHub to router or existing wired network.
3. Wait for the Wi-Fi LED to turn white.
4. Now the FileHub has become an AP and a new connection named
"FileHubPlus-XXXX" will show in the list of Wi-Fi networks.
Connect your devices to it (default password 11111111).
Turn on the Wi-Fi of your device
assword 11111111

Router Mode

In this mode, the FileHub is connected to digital subscriber line
(DSL) modem or cable modem and works as a regular router.
Conf iguration
1. Connect the FileHub to DSL Modem and turn on the FileHub.
2. Ensure your device (PC/ Smartphone / Tablet) is connected to
FileHub Wi-Fi already (follow the previous instructions).
3. Access: 10.10.10.254 via your web browser
(IE, Firefox, Safari, or an alternative browser).
4. Login with user name: "admin" (all lower case) and no password
(leave the password field blank).
Connected already
5. Click "Network Settings" > "Internet" > "Wired Access", where it
will show Dynamic IP, Static IP, PPPoE for router setup.
Please consult your network administrator or refer to the user
documentation of your network to check which one to select.
Username: admin
Password: leave it blank
03/04