Bridge Mode - RAVPower RP-WD007 FILEHUB Handbuch

Choose the way to con gure
the router mode

Bridge Mode

In bridge mode, FileHub can create a secured Wi-Fi with a new SSID
based on an existing wireless network.
NOTE: Setting your FileHub to Bridge Mode will disable all its router
capabilities and turn it into an access point. It will cease to act
as a DHCP server.
Conf iguration
1. Open the FileHub Login and Admin Page
(Refer to Steps 1-5 from Previous section "Router mode")
2. Go to "Network Settings" > "Internet" > "Wireless Access" to create
the connection between your FileHub and your existing wireless
Internet.
*Sta c IP/ Dynamic IP/ PPPoE?
When you use your DSL or cable modem
without the router, how does it work?
Sta c IP: It requires you to go into the
TCP/IP se ng and specify the IP address
and DNS se ng.
Dynamic IP: No IP address or DNS
se ngs are required to assign.
PPPoE: It requires you to specify the
username and password assigned by
your ISP.
3. FileHub shall then broadcast the connection into a different SSID
called FileHubPlus-xxxx.
Use FileHub as a Power Bank
Use FileHub as a power bank to charge your mobile device by simply
connecting it to your devices via USB charging cable.
Check the remaining battery level by pressing the Power Button.
05/06