Comunello SALIENT Installations- Und Gebrauchsanleitung Seite 15

INSTALLATION AND USER'S MANUAL
SALIENT / SALIENT SLOW
EC DECLARATION OF COMFORMITY:
The undersigned Mr. Luca Comunello, representing the following manufacturer,
Fratelli COMUNELLO Spa
Via Cassola 64, 36027 Rosà (VI) – Italy
DECLARES that the equipment described below:
Description: Electromechanical actuators for projecting up and over and sectional spring-loaded.
Model: SALIENT
Is in compliance with the provisions set down in the following directives:
• 2004/108 EC Directive (EMC Directive)
• 2006/42/EC Directive (Machinery Directive)
and that all the rules and/or technical specifications shown below have been applied:
EN61000-6-2 + EN61000-6-3
EN62233 :2008
EN301489-1 + EN301489-3 + EN300220-2
EN60335-2-103 :2003 + EN60335-1 :2002
EN13241-1 + EN12445 + EN12453
and the following amendments.
Last two digits of the year in which the EC marking has been affixed
Rosà (VI) – Italia
01-09-2014
and he also declares that it is not allowed to commission the device until the machinery where it will be incorporated or whose it will
become a component will have been identified and will have been declared in compliance with the conditions of the 2006/42 EC Directive
and with the national legislation that transpose it.
Mr. Luca Comunello
Fratelli Comunello Legal Representative
Fratelli Comunello S.p.A.
Company with certified Quality Management System
UNI EN ISO 9001:2008.
(Certificate n° 50 100 11235 Rev. 01)
14
COMUNELLO ®Copyright 2013 - All right reserved
15