Fixing The Frame To The Doc - Nilox DOC KART Handbuch

FIXING THE FRAME TO THE DOC

When you have inserted the belts in their housings, you may assemble the resulting unit with
your DOC.
Rest the semi-frame on the DOC and
pass the belts underneath it
Use the Allen wrench supplied to adjust
the width of the support to suit the DOC
used.
Pass the belts so that they are tight and
the DOC adheres perfectly to the
structure.
To prevent the strap from dragging on
the ground, we suggest you turn the
extra part of the strap up and hold it in
place with the clamp provided.
EN
If using velcro straps, simply thread
the strap through the supports and
stick it together..
CAUTION:
SYMMETRICALLY AND CHECK THAT
THE CONTROL LEVER PART IS IN THE
MIDDLE OF THE PLATFORM
.
8
ADJUST WIDTH