Nilox DOC KART Handbuch Seite 13

• Rotate DOC until both levels on each footpad are level. lf you do not have a bubble
level, make sure both footpads are equal with each other and level to the
• ground as best as possible.
• While keeping DOC level, hold the power button down. DOC will make the normal
power on tone, wait 3 seconds and then you will hear a single
• beep. Front LEDs will begin flashing 5 times quickly. Release the power button.
Front LEDs will continue flashing every 3 seconds. Power the DOC off.
Power on again. DOC should now be calibrated, if DOC is still not calibrated
•
correctly go to step 1 and begin making minor adjustments.
EN
12